b
balancing by weights 砝碼平衡
balancing by weightion 砝碼平衡
belt conveyor 皮帶輸送機
belt speed 帶速
belt weigher 皮帶秤
buffer channel 緩衡器通道

c
calculated net values 計算凈重值
carrying rollers 輸送托輥
compression loading 壓向載荷 
construction 結構
construction of an instrument 秤的結構
continuous totalizing automatic weighing instruments(belt weigher) 連續累計自動衡器(皮帶秤)
control devices 控制裝置
control indicating device 控制用指示裝置
control instrument 管理衡器/控制衡器
control method 控制方法
control of measring instrument 計量器具控制
control value 控制值
correction device 修正裝置/校準裝置
counterpoise 天衡器，砝碼/配重 
counterweight 砝碼
creep  蠕變
cumulative weigher 累加衡器
cycling chain weights 循環鏈碼

d
digital indication 數字示值
digital indicating weighing instrument 數字指示秤
digital weighing indicator 數字稱重顯示器
discontinuous totalizing automatic weighing instruments(totalizing hopper weighers) 非連續累計自動衡器
discrimination 鑒別力
discrimination threshold 鑒別力閾 
displacement sensing device 位移檢測裝置
displacement simulating device 位移模擬裝置
displacement transducer 位移傳感器
disturbance 干擾
durability 耐久性 
durability error  耐久性誤差
durability test 耐久性試驗

e
electronic component 電子元件
electronic device 電子裝置
electronic instrument 電子衡器
electronic parts 電子部件
electronic sub-assembly 電子組件
errors 誤差
error of indication 示值誤差
expanded uncertainty 擴展不確定度
extended indicating devices 細分指示裝置

f
fault 干擾誤差/增差
fault detection output 干擾誤差檢測輸出
feed control device 給料控制裝置
feeding device 給料裝置
feeding flowrate 給料流量
fill 裝料
fill setting device 裝料設定裝置
final feed cut-off device zui后斷科裝置
final feed time zui后給料時間
zui后給料時間 final time
flowrate indicating device 流量顯示器
flowrate regulating device 流量調節裝置 
flowrate 流量
full draught weighing 整車稱量

g
general definitions 一般定義
general totalization indicating device 總累計顯示器
gross value 毛重值

h
humidity symbol 濕度符號
hysteresis error 滯后誤差

i
inclusive of conveyer load recepter 輸送機式承載器
indicating component 指示器件
indicating device 指示裝置
indication error 指示誤差
indication stabilizing device 示值穩定裝置
indications and errors  示值與誤差
indicating device 指示裝置
influence and reference conditions 影響與參考條件 
influence factor 影響因子
influence quantity 影響量　
initial intrinsic error 初始固有誤差
initial verification 檢定
initial zero-setting device 初始置零裝置
instantaneous load indicating device 瞬時載荷顯示器
integral verification method 集成檢定方法 
intrinsic error 固有誤差
in-motion test 動態試驗
in-service inspection (inspection in use) 使用中檢驗
 

l
levelling device 水平指示裝置
load cell 稱重傳感器
load cell equipped with electronics 裝有電子線路的傳感器
load cell error 傳感器誤差
load cell family 傳感器家族
load cell group 傳感器組
load cell interval 傳感器分度值 
load cell intrinsic error 傳感器固有誤差
load cell measuring range 傳感器測量范圍
load cell output 傳感器輸出
load cell verification interval  傳感器檢定分度值
load receptor 承載器
load-transmitting device 載荷傳遞裝置

m
machinery & electronic fill weighing instrument 機電裝料衡器
material test 物料試驗
maximum capacity(max) zui大秤量(max)
maximum flowrate(qmax) zui大流量(qmax)
maximum load of the measuring range 測量范圍的zui大載荷
maximum load per unit length of the belt 皮帶的單位長度zui大載荷量
maximum number of load cell verification intervals 傳感器zui大檢定分度數
maximum operating speed zui高運行速度
maximum permissible error zui大允許誤差(mpe)
maximum safe load zui大安全載荷
maximum span stability error zui大量程穩定度誤差
maximum tare effect zui大除皮量
maximum transit speed zui高通過速度
methods of indication 示值方式
metrological characteritics 計量特性
metrological controls  計量控制
metrological management 計量管理
metrological properties 計量性能 
minimum capacity(min) zui小秤量(min)
minimun dead load zui小靜載荷
minimum dead load output return zui小靜載荷輸出恢復 
minimum discharge zui小出料
minimum flowrate(qmin) zui小流量(qmin)
minimum load cell verification interval 傳感器zui小檢定分度值 
minimum load of the measuring range 測量范圍的zui小載荷
minimum operating speed zui低運行速度
minimum test load zui小試驗載荷
minimum totalized load zui小累計載荷
module 模塊 
multi-interval instrument 多分度值秤
multiple load receptors 多個載荷承載器

n
net value 凈重值
nonautomatic weighing instrument 非自動秤
non-automatic zero-setting device 非自動置零裝置
non-linearity 非線性
non-self-indicating instrument 非自行指示秤
number of load cell verification intervals 傳感器檢定分度數
number of verification scale interval 檢定分度數(單分度值秤)

o
operation checking device 運行檢驗裝置 
other weight values 其他重量值
overall inaccuracy of reading 讀數的總不準確度 

p
partial totalization indicating device 部分累計顯示器
partial weighing 局部稱量
pattern evaluation 型式評價(定型鑒定)
performance test 性能試驗
preset tare device 預置皮重裝置
preset tare values 預設皮重值
preset value 預設值
pre-se-lection device 預設裝置
price-computing instrument 計價秤 
price-labelling instrument 價格標簽秤
primary indications 主要指示
principal parts 主要部件
principal totalization indicating device 主要累計指示裝置
printing device 打印裝置
prototype testing 樣機試驗  

r
range of operating speeds 運行速度范圍
rated minimum fill 額定zui小裝料
rated operating conditions 額定操作條件
reading 讀數 
reading by simple juxtaposition 簡單并列讀數
reduction ratio r 縮小比r 
reference conditions 參考條件/標準條件
reference position 標準位置
reference particle mass 參考顆粒質量 
reference particle mass of a product 物料參考顆粒質量
reference value for accuracy class 準確度等級的參考值
reference vehicle 參考車輛
relative dr or z 相對zui小靜載荷輸出恢復(dr)或z 
relative vmin or y 相對vmin或y 
repeatability 重復性
repeatability error 重復性誤差 
rounding error 化整誤差 

s
safe load limit 安全極限載荷
scale base 標尺基線
scale divisions 標尺分度 
scale interval(d) 分度值(d)
scale interval of numbering 數碼分度值
scale intervals 分度值
scale interval 實際分度值
scale interval for testing 試驗分度值
scale mark 標尺標記
scale spacing 分度間距
secondary indications 次要指示 
self-indicating instrument 自行指示秤
self-indication capacity 自行指示秤量
semi-automatic zero-setting device 半自動置零裝置
sensitivity 靈敏度
separate verification method 獨立檢定方法
significant fault 顯著增差
simulation load test 模擬載荷試驗
simulation test 模擬試驗
significant durability error 顯著耐久性誤差
significant fault 顯著干擾誤差
single speed belt weigher 單速皮帶秤
span 量程
span stability 量程穩定度
span stability test 量程穩定度試驗
speed 速度
static set point 靜態設定點
static test 靜態試驗
static weighing 動態稱量
subtractive weigher 減量衡器
subsequent verification 后續檢定
supplementary devices 輔助裝置
supplementary totalization indicating device 輔助累計指示裝置/附加累計顯示器
 

t
tare-balancing devices 皮重平衡裝置
tare device 除皮裝置
tare value 皮重值
tare-weighing device 皮重稱量裝置
temperature effect on minimum dead load output zui小靜載荷輸出溫度影響
temperature effect on sensitivity 靈敏度溫度影響
tension loading 拉向載荷
tests 試驗
total vehicle weighing 車輛總重計量
totalization device 累計器 
totalization indicating device 累計顯示器/累計指示裝置 
totalization scale interval 累計分度值(d)

v
variable speed belt weigher 變速皮帶秤 
vehicles 車輛
verification 檢定
verification marks 檢定標記
verification regulation for continuous totalizing automatic weighing instruments(belt weigher) 連續累計自動衡器(皮帶秤)檢定規程
verification regulation of automatic gravimetric filling instruments 重力式自動裝料衡器檢定規程
verification scale interval 檢定分度值

w
warm-up time 預熱時間
weigh 上秤/稱重，秤重
weigh-bridge 地磅;軌道衡
weigh length 稱量長度(l)
weigh over scale 衡器過重 
weigh zone 稱重區
weighed by scale 衡器計重 
weigher 計量機/過磅員磅秤/過磅員
weighing 過秤/過磅費;稱量;起錨
weighing anchor 起錨中
weighing capacity 秤量
weighing charges 過磅費 
weighing cycle 稱量周期
weighing house 過磅處
weighing instrument 衡器 
weighing machine 磅秤 
weighing range 稱量范圍
weighing results 稱量結果
weighing rollers 稱重托輥 
weighing table load recepter稱量臺式承載器
weighing unit 稱重單元
weighshaft 搖臂軸
weight 重量加權/重量/重力/重/設計重量
weight account 重量明細表/重量報表
weight andor measurement 重量噸和尺碼噸 
weight in average 平均重量 
weight basis 計重標準 
weight belt 腰鉛/加重帶 
weight brake 重力閘 
weight break point 轉折點 
weight calculation 重量計算 
weight capacity 承重能力 
weight cargo 計重貨物/按重量計費的貨物 
weight carrying capacity 載重量起重量 
weight certificate 重量證明書 
weight chart 重量圖 
weight component 重量因素 
weight control 重量控制 
weight curve 重量曲線/重量分布曲線 
weight distribution curve 重量曲線 
weight distribution 重量分布 
weight enumerator 權重計數子 
weight estimation 重量估算/重量估計
weight flow 重量消耗量 
weight force 重力
weight guarantee 擔保重量 
weight guaranteed 保證重量/擔保重量 
weight handling equipment 起重運輸設備/起重設備/起重建設 
weight house 過秤處 
weight in average 平均重量 
weight increment 重量增加 
weight indicating controller 重量指示控制器 
weight indicator 重量指示器 
weight lifting ability 起重能力 
weight list 重量單 
weight loss 重量損失 
weight margin 重量儲備 
weight & measurement 貨載衡量 
weight memo 重量單 
weight note 磅碼單 
weight rate 重量流量/重量定額 
weight ratio 重量比 
weight report 重量記錄表 
weight rope 支索 
weight said to be 貨物據稱重量 
weight scale 稱量臺;定秤 
weight shaft 倒車軸 
weight to-power ratio 重量功率比 
weight ton method 按重量計算運費法 
weight ton 重量噸(慣例) 
weight tonnage 重量噸位 
weight tray 承載托盤 
weight unknown clause 貨物重量不知條款 
weight unknown 重量不明
weight-carrying ability 載重性能 /載重能力 
weight-carrying capacity 載重量 
weight-carrying 載重的 
weight-lifting ability 起重能力 
weight-limit 重量* 
weight-limited design 限制重量設計 
weight-loaded governor 載重調節器
weight-power ratio 重量功率比 
weight-stability moment 重量-穩性力矩 
weight-tonnage 重量噸位 
weighted 受力的
weighted code 權碼 
weighting material 加重料
weighted mean 加權平均 
weighted valve 加重閥 
weighting network 計權網絡 
weighting note 磅碼單
weightless beam 無重梁 
weightmeasurement ratio 重量體積比
weights and measures 度量衡

z
zero-setting device 置零裝置
zero-tracking device 零點跟蹤裝置