TC3000 Thermal Conductivity

來源：西安夏溪電子科技有限公司 2013年07月27日 10:17

Thermal conductivity measuring methods can be divided into steady-state method and non-steady-state method by macroscopic mechanism of thermal conductivity.

Steady-state method requires long period ,and there are also many other factors which affect measuring accuracy. However, non-steady-state method has the advantage of short measuring time, high accuracy and low requirements for operational environment. Especially, the transient hot-wire method has been considered internationally as the best measuring method of thermal conductivity in the research area of thermal conductivity.

Measuring Principle

The origin of hot-wire method could be traced back to the year 1780 when an American scientistJoseph Priestley made the first experiment about heat transfer ability of air. In 1931，Stâlhane and Pyk, who are the first to adopt transient hot-wire method in measuring the thermal conductivity of solid, powder and liquid, Hot-wire method is now widely used in gas, liquid, solid, metal fusion and so on.

相關產品

免責聲明

凡本網注明“來源：化工儀器網”的所有作品，均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品，未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的，應在授權范圍內使用，并注明“來源：化工儀器網”。違反上述聲明者，本網將追究其相關法律責任。
本網轉載并注明自其他來源（非化工儀器網）的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點和對其真實性負責，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品第一來源，并自負版權等法律責任。
如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。

99超碰中文字幕在线观看-天天干天天日天天舔婷婷-我看操逼的好看的女人的-日本一二三四五区日韩精品

TC3000 Thermal Conductivity

免責聲明

聯系我們

關注我們