99超碰中文字幕在线观看-天天干天天日天天舔婷婷-我看操逼的好看的女人的-日本一二三四五区日韩精品

復合臺階鉆修磨產品介紹

伊爾耐德（天津）科技公司針對復合臺階鉆提供專業的修磨解決方案。

復合臺階鉆修磨的具體工作流程如下：

首先，對復合臺階鉆進行全面檢測，使用各種高精度測量儀器獲取刀具的各臺階尺寸、切削刃狀況等信息，記錄磨損數據。

接著，依據檢測數據進行深入分析，根據不同臺階的切削要求和材質特性，結合刀具的整體性能要求，制定個性化的修磨方案，確定各臺階的修磨深度、角度以及修磨順序。

然后，采用專業的磨削設備，先將復合臺階鉆固定在合適的夾具上，然后按照修磨方案依次對各個臺階進行精細磨削，確保每個臺階的切削刃鋒利度和尺寸精度都達到要求。在磨削過程中，嚴格控制磨削速度、進給量等參數，保證磨削質量的一致性。

最后，在修磨完成后，再次對復合臺階鉆進行全面檢測，確保各臺階之間的尺寸精度和同心度符合要求，同時測量切削刃的粗糙度和鋒利度，保證復合臺階鉆在鉆孔過程中能夠繼續穩定、高效地進行作業，滿足各種復雜的鉆孔加工需求。

Composite step drill grinding product introduction

lrnide(Tianjin) Technology Co., Ltd. provides professional grinding solutions for composite step drills.

The specific work flow of composite step drill grinding is as follows:

First, conduct a comprehensive inspection of the composite step drill, use various high-precision measuring instruments to obtain the size of each step of the tool, cutting edge condition and other information, and record wear data.

Then, conduct in-depth analysis based on the inspection data, formulate a personalized grinding plan based on the cutting requirements and material characteristics of different steps, and combine the overall performance requirements of the tool to determine the grinding depth, angle and grinding order of each step.

Then, use professional grinding equipment to first fix the composite step drill on a suitable fixture, and then finely grind each step in turn according to the grinding plan to ensure that the cutting edge sharpness and dimensional accuracy of each step meet the requirements. During the grinding process, strictly control parameters such as grinding speed and feed rate to ensure the consistency of grinding quality.

Finally, after grinding, the composite step drill is fully inspected again to ensure that the dimensional accuracy and concentricity between the steps meet the requirements. At the same time, the roughness and sharpness of the cutting edge are measured to ensure that the composite step drill can continue to operate stably and efficiently during the drilling process to meet various complex drilling processing needs.