99超碰中文字幕在线观看-天天干天天日天天舔婷婷-我看操逼的好看的女人的-日本一二三四五区日韩精品

頻閃儀的工作原理：

頻閃儀是一種用于使循環移動的物體看起來靜止或緩慢移動的裝置。它的工作原理是燈發出短暫而快速的閃光，當閃光的頻率與物體移動的頻率相匹配時，物體似乎移動緩慢或靜止。出于同樣的原因，Stroboscope 可用于各種行業，用于各種質量控制和檢查作。

LED頻閃儀在鋼鐵工業中的應用：

在鋼鐵工業中，制造熱軋和冷軋板、卷材等的軋機在生產過程中面臨劃痕、凹痕等缺陷。這些板材以至少 200 米/分鐘的非常高的速度制成。因此，在生產階段不可能發現這些缺陷。

路陽儀器設備公司 的LUYOR-906L便攜式頻閃儀是在生產過程中輕松檢測這些缺陷的***合適設備。它的工作原理是燈發出短暫而快速的閃光，當閃光的頻率與線路速度相匹配時，板材/線圈似乎移動緩慢或靜止，并且很容易識別凹痕、劃痕等缺陷。

LUYOR-906L便攜式頻閃儀的***大閃光頻率為 300,000 FPM。閃光的頻率和持續時間可以很容易地與生產線速度同步。LUYOR-906L便攜式頻閃儀使用超亮 LED，可在 1m 的距離內提供 40 x 40 cm 的均勻照明，并且可以通過組合多個單元（***多 12 個來輕松擴展該區域，以匹配您的生產線寬度。由于LUYOR-906L便攜式頻閃儀 使用 LED，因此無需更換燈泡，因此能耗和運行成本也較低。

總之，Stroboscope 為鋼廠提供了更高的效率。通過使用這種頻閃儀，鋼卷軋機可以提高卷材質量的一致性，消除停機時間和維護，降低能源成本并提高安全性。

Applications in Steel Industry:

Principle:

A stroboscope is a device used to make a cyclically moving object appear to be stationary or slow- moving. It works on the principle that a lamp emits brief and rapid flashes of light, when the frequency of the flashes matches the frequency at which the object is moving, the object appears to be moving  slow or stationary. For this same reason, Stroboscope can be used in various industries for various quality control and inspection operations.

Applications in Steel Industry:

In steel industry, rolling mills that make hot-rolled and cold rolled sheets, coils etc. face defects like scratches, dents etc. during the production process. These sheets are made at a very high speed of minimum 200m/min. So, there is no possibility of these defects getting identified during the production stage.

luyor instrument's LUYOR-906L portable Stroboscope is the most suitable device to detect these defects easily during the production process. It works on the principle that a lamp emits brief and rapid flashes of light, when the frequency of the flashes matches the line speed, the sheet/coil appears to be moving slow or stationary and the defects like dents, scratches can be easily identified.

LUYOR-906L has a maximum flash frequency of 300,000 FPM. The frequency and the duration of the flashes can be easily synchronized with the line speed with the help of the Controller. LUYOR-906L uses ultra-bright LEDs for uniform illumination of a range of 40 x 40 cm brightly from a distance of 1m and this area can be easily extended by combining multiple units (upto 12) of LUYOR-906L to match the width of your production line. Since LUYOR-906L uses LEDs, it also has lower energy consumption and running

costs because there is no need for lamp replacement.

In Conclusion, Stroboscope provides greater efficiency in the steel plants. By using this stroboscope, steel coil mills can improve the consistency of coil quality, eliminate downtime and maintenance, reduce energy costs, and improve safety.