Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for thepurpose of finishing the heat.
Steels with improved machinability as a result of the addition of lead or higher sulfur contents, depending on the manufacturing process up to around 0.1 % S, may be supplied on request. In this case, the upper limit of the manganese content may be increased by 0.15 %

C	Si	Mn	P	S
0.07 - 0.13	max 0.4	0.3 - 0.6	max 0.035	max 0.035

Mechanical properties of steel C10E (1.1121)


Rm - Tensile strength (MPa) (+A)	430


Rm - Tensile strength (MPa) (+CR)	830


R_p0.2 0.2% proof strength (MPa) (+A)	345


A - Min. elongation Lo = 80 mm (%) (+A)	26

Brinell hardness (HBW): (+A)	131
Brinell hardness (HBW): (+N)	85 - 140
Rockwell B hardness ( HRB or RB): (+A)	73
Vickers hardness ( HV): (+)	135
Vickers hardness ( HV): (+CR)	250

Properties of steel C10E (1.1121)

Weldability: It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions.

Equivalent grades of steel C10E (1.1121)Warning! Only for reference

EU
EN

Germany
DIN,WNr

France
AFNOR

England
BS

Italy
UNI

Spain
UNE

Russia
GOST

Inter
ISO

C10E

Ck10

Ck15

XC10

XC12

045M10

CS12

C10

C15

C10k

C10

C15M2

99超碰中文字幕在线观看-天天干天天日天天舔婷婷-我看操逼的好看的女人的-日本一二三四五区日韩精品

1.1121對應(yīng)牌號

會員登錄

收藏該商鋪

提示