您好, 歡迎來到化工儀器網
汽車連接器的國家標準和行業標準是？
文獻號 | 中文題名 | 英文題名 |
GB/T 1332-1991 | 載貨汽車定型試驗規程 | Trucks--Engineering approval evaluation program |
GB 1495-2002 | 汽車加速行駛車外噪聲限值及測量方法 | Limits and measurement methods for noise emitted by accelerating motor vethicles |
GB/T 2977-1997 | 載重汽車輪胎系列 | Series of truck tyres |
GB/T 3273-2005 | 汽車大梁用熱軋鋼板和鋼帶 | Hot-rolled steel plates(sheets)and strips for auto frames |
GB/T 3487-2005 | 汽車輪輞規格系列 | Rim contours for motor vehicles |
GB/T 3730.1-2001 | 汽車和掛車類型的術語和定義 | Motor vehicles and trailers-Types-Terms and definitions |
GB/T 3730.3-1992 | 汽車和掛車的術語及其定義 車輛尺寸 | Motor vehicles and towed vehicles--Dimensions of vehicles--Terms and definitions |
GB/T 3798.1-2005 | 汽車大修竣工出廠技術條件 第1部分;載客汽車 | Technical requirements for completion and acceptance of vehicle overhaul Part 1:Passenger vehicle |
GB/T 3798.2-2005 | 汽車大修竣工出廠技術條件 第2部分;載貨汽車 | Technical requirements for completion and acceptance of vehicle overhaul Part 2:Goods vehicle |
GB/T 3799.1-2005 | 商用汽車發動機大修竣工出廠技術條件 第1部分;汽油發動機 | Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 1:Gasoline engines |
GB/T 3799.2-2005 | 商用汽車發動機大修竣工出廠技術條件 第2部分;柴油發動機 | Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 2:Diesel engines |
GB 3847-2005 | 車用壓燃式發動機和壓燃式發動機汽車排氣煙度排放限值及測量方法 | Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E. |
GB/T 4094.2-2005 | 電動汽車操縱件、指示器及信號裝置的標志 | Electric vehicles-Symbols for control,indicators,and l-tales |
GB 4094-1999 | 汽車操縱件、指示器及信號裝置的標志 | Motor vehicles--symbols for controls,indicators and l-tales |
GB/T 4095-2005 | 商用汽車輻板式車輪在輪轂上的安裝尺寸 | Disc wheels for trucks.Dimensional characteristics of attachment on hub |
GB/T 4352-1984 | 載貨汽車運行燃料消耗量 | Fuel consumption for trucks in operation |
GB/T 4353-1984 | 載客汽車運行燃料消耗量 | Fuel consumption for passenger vehicles in operation |
GB/T 4501-1998 | 載重汽車輪胎耐久性試驗方法 轉鼓法 | Endurance test for truck and bus tyres--Drum method |
GB 4599-1994 | 汽車前照燈配光性能 | Photometric characteristics of headlamps for motor vehicles |
GB 4660-1994 | 汽車前霧燈配光性能 | Photometric characteristics of front fog lamps for motor vehicles |
GB/T 4780-2000 | 汽車車身術語 | Terms for motor vehicle body |
GB 4785-1998 | 汽車及掛車外部照明和信號裝置的安裝規定 | Prescription for installation of the external lighting and light signalliug devices for motor vehicles and their trailers |
GB/T 4970-1996 | 汽車平順性隨機輸入行駛試驗方法 | Method of random input running test--Automotive ride comfort |
GB/T 4971-1985 | 汽車平順性名詞術語和定義 | Terms and definitions--Automotive ride comfort |
GB/T 5137.1-2002 | 汽車安全玻璃試驗方法 第1部分;力學性能試驗 | Road vehicles-safety glazing materials--Test methods for mechanical properties |
GB/T 5137.2-2002 | 汽車安全玻璃試驗方法 第2部分;光學性能試驗 | Road vehicles-safety glazing materials-Test methods for optical properties |
GB/T 5137.3-2002 | 汽車安全玻璃 試驗方法 第3部分;耐輻照高溫潮濕燃燒和耐模擬氣候試驗 | Road vehicles-safety glazing materials--Test methods for resistance to radiation,high temperature,humidity,fire and simulated weathering |
GB/T 5137.4-2001 | 汽車安全玻璃太陽能透射比測定方法 | Road vehicles--Safety glazing materials--Method for the determination of solar transmittance |
GB/T 5181-2001 | 汽車排放術語和定義 | Automotive emission-Terms and definitions |
GB/T 5335-1985 | 汽車制動裝置液壓試驗的連接器 | Auto hydraulic pressure test connection for braking equipment |
GB/T 5337-1985 | 汽車電器、燈具和儀表名詞術語 | Nomenclature and terminology for automotive electrical equipment, lighting and instrumentation |
GB/T 5620-2002 | 道路車輛 汽車和掛車 制動名詞術語及其定義 | Road vehicles--Braking of automotive vehicles and their trailers--Vocabulary |
GB/T 5624-2005 | 汽車維修術語 | Motor vehicle maintenance and repair terms |
GB/T 5671-1995 | 汽車通用鋰基潤滑脂 | General purpose lithium base grease for auto |
GB 5763-1998 | 汽車用制動器襯片 | Brake linings for autos |
GB/T 5764-1998 | 汽車用離合器面片 | Clutch facings for autos |
GB/T 5845.2-1986 | 城市公共交通標志 公共汽車標志 | Marks for urban public transport--Mark for bus |
GB/T 5845.7-1986 | 城市公共交通標志 城市出租汽車標志 | Marks for urban public transport--Identification mark for taxi |
GB/T 5845.11-1986 | 城市公共交通標志 公共汽車、無軌電車、有軌電車站牌 | Marks for urban public transport--Stop board of bus and trolleybus and tram car |
GB/T 5845.13-1989 | 城市公共交通標志 公共汽車、無軌電車、有軌電車路牌 | Marks for urban public transport Line number plate of bus trolleybus and tram |
GB/T 5902-1986 | 汽車平順性脈沖輸入行駛試驗方法 | Method of pulse input running test--Auto ride comfort |
GB/T 5909-1995 | 載貨汽車車輪性能要求和試驗方法 | Performance requirements and test methods of truck wheels |
GB 5920-1999 | 汽車及掛車前位燈、后位燈、示廓燈和制動燈配光性能 | Photometric characteristics of front and Rear position lamps,end-outline marker lamps and stop lamps for motor vehicles and and their trailers |
GB/T 5921-1986 | 汽車和掛車 氣壓制動系部件上接口的識別標記 | Motor vehicles and towed vehicles--Air braking systems--Identification of connections on units |
GB/T 5922-1986 | 汽車和掛車 氣壓制動裝置壓力測試連接器 | Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment |
GB/T 5923-1986 | 汽車柴油機燃油濾清器的試驗方法 | Test methods of fuel filters for automotive compression ignition engines |
GB/T 6068.1-2005 | 汽車起重機和輪胎起重機試驗規范 第1部分;一般要求 | Test code for truck crane and crane Part 1:General requirements |
GB/T 6068.2-2005 | 汽車起重機和輪胎起重機試驗規范 第2部分;性能試驗 | Test code for truck crane and crane Part 2:Performance test |
GB/T 6068.3-2005 | 汽車起重機和輪胎起重機試驗規范 第3部分;結構試驗 | Test code for truck crane and crane Part 3:Structure test |
GB/T 6323.1-1994 | 汽車操縱穩定性試驗方法 蛇行試驗 | Controllability and stability test procedure for autos- Pylon course slalom test |
GB/T 6323.2-1994 | 汽車操縱穩定性試驗方法 轉向瞬態響應試驗(轉向盤轉角階躍輸入) | Controllability and stability test procedure for autos- Steering transient response test (Steering wheel angle step input) |
GB/T 6323.3-1994 | 汽車操縱穩定性試驗方法 轉向瞬態響應試驗(轉向盤轉角脈沖輸入) | Controllability and stability test procedure for autos-Steering transient response test (Steering wheel angle pulse input) |
GB/T 6323.4-1994 | 汽車操縱穩定性試驗方法 轉向回正性能試驗 | Controllability and stability test procedure for autos-Returnability test |
GB/T 6323.5-1994 | 汽車操縱穩定性試驗方法 轉向輕便性試驗 | Controllability and stability test procedure for autos-Steering efforts test procedure |
GB/T 6323.6-1994 | 汽車操縱穩定性試驗方法 穩態回轉試驗 | Controllability and stability test procedure for autos-Steady static circular test procedure |
GB/T 6327-1996 | 載重汽車輪胎強度試驗放方法 | Strength test method for truck and bus tyres |
GB/T 6726-1986 | 貨運汽車用冷彎型鋼尺寸、外形、重量及允許偏差 | Cold forming sectional steel for cargo vehicle--Dimension, form, weight and permissible deviations |
GB/T 6727-1986 | 客運汽車用冷彎型鋼尺寸、外形、重量及允許偏差 | Cold forming sectional steel for passenger vehicle--Dimension, form, weight and permissible deviations |
GB/T 7035-1993 | 輕型載重汽車輪胎高速性能試驗方法 轉鼓法 | High speed performence test for light truck tyres.Drum method |
GB 7036.1-1997 | 充氣輪胎內胎 第1部分;汽車輪胎內胎 | Inner tube of pneumatic tyres--Part 1: Inner tube of auto tyres |
GB 7063-1994 | 汽車護輪板 | The wheel guards of motor vehicles |
GB 7128-1986 | 汽車氣壓制動膠管 | Rubber hose for automotive air brake system |
GB 7524-1987 | 汽車液壓制動橡膠皮碗 | Hydraulic brake rubber cups for autos |
GB 8410-2006 | 汽車內飾材料的燃燒特性 | Flammability of automotive interior materials |
GB 9656-2003 | 汽車安全玻璃 | Safety glazing materials for road vehicles |
GB 9744-1997 | 載重汽車輪胎 | Truck tyres |
GB/T 10414.2-2002 | 帶傳動 同步帶傳動 汽車同步帶輪 | Belt drives--Synchronous beltdrives--Automotive pulleys |
GB/T 10716-2000 | 汽車同步帶物理性能試驗方法 | Synchronous belt drives-Automotive belt-Determination of physical properties |
GB 11340-2005 | 裝用點燃式發動機重型汽車.曲軸箱污染物排放限值及測量方法 | Limits and measurement methods for crankcase pollutants From heavy-duty vehicles equipped with P.I engines |
GB/T 11545-1996 | 汽車V帶疲勞試驗方法 | V-belt drives for the automotive industry--Fatigue test |
GB 11550-1995 | 汽車座椅頭枕性能要求和試驗方法 | Motor vehicles--Seats head restraints--Performance requirements and test methods |
GB 11554-1998 | 汽車及掛車后霧燈配光性能 | Photometric characteristics of rear fog lamp for motor vehicles and their trailers |
GB 11555-1994 | 汽車風窗玻璃除霧系統的性能要求及試驗方法 | Motor vehicles-Windshield demisters-Performance requirements and test methods |
GB 11556-1994 | 汽車風窗玻璃除霜系統的性能要求及試驗方法 | Motor vehicles-Windshield defrosters-Performance requirements and test methods |
GB 11557-1998 | 防止汽車轉向機構對駕駛員傷害的規定 | The stipulation protecting drivers from being injured by motor vehicle steering mechanism |
GB 11562-1994 | 汽車駕駛員前方視野要求及測量方法 | Motor vehicles-Forward visibility for drivers-Requirements and measurement methods |
GB 11567.1-2001 | 汽車和掛車側面防護要求 | Motor vehicles and trailers--Lateral protection requirements |
